To build the leading brand of pellet machine industry

Jiangsu Yongli Machinery Co. Ltd. has an area of 22 thousand square meters of production plant, equipped with advanced production equipment and top professional R & D team, over the years has developed into a set of product development, production and sales of integrated high-end enterprise. The company independently developed granulator production, relying on technology and improve the process of manufacturing several decades of professional pellet mill, the production of various production has YPM series of biomass, animal feed and aquatic feed pellet machine.

How to build the leading brand of the pellet machine industry, improve the quality and service life of the pellet products?

Correctly adjusting the gap between the ring die and press roller can improve the service life of parts.

Roller and ring die pelleting machine gap adjustment is an important factor in granulator operation, so the rationality of the clearance adjustment directly affects the performance of the granulator. The correct adjustment will make the pellet mill to obtain the maximum production capacity, pressure roller and ring prolong the service life of the mould, so as to reduce production, reduce product manufacturing cost, improve the economic.

How to fit the position of the roller?

The direction of rotation of the ring die pelleting machine work in clockwise direction, if equipped with two pressure roller granulator, start the installation should be left convex maximum eccentric pressure roller installed on the left half of the region in the ring mold, maximum eccentric pressure roller installed in the right convex ring mold right half area as with many pressure rollers; granulating machine, should also ensure that when the eccentric block to rotate along the direction opposite to the rotation of the ring die, pressure roller should be moved to contact with the ring mode direction, otherwise the roller is not properly installed, should be re installed in accordance with the above requirements. The gap between the roller and the ring die is generally 0.3mm ~ 0.5mm, which usually makes the outer surface of the press roller to be slightly contact with the inner surface of the rotating ring die, and the ring mode is driven to rotate. Under normal circumstances, the two small die hole gap is small, the two large die hole; new die gap is small, the old die gap bigger; if the roller and the ring die gap is too small, roller and ring die is easy to wear and noise.



Web: www.yongli-machine.com

Contact: jessica@yongli-machine.com

YouTube: https://www.youtube.com/channel/UCG_4zOC9ln9xdS8R_qMCxSQ