On the afternoon of October 5th,inspector Wang had tested YHM68*80 biomass hammer mill on the no-load for 30 minutes.
Mill motor power supply was switched on, every 5 minutes on the inside and outside the end bearing temperature testing and recording (temperature of <50 DEG C), check the machine noise is in the normal range, the motor is functioning properly, ensure the service life of the bearing, mill work.
Mill motor power supply was switched on, every 5 minutes on the inside and outside the end bearing temperature testing and recording (temperature of <50 DEG C), check the machine noise is in the normal range, the motor is functioning properly, ensure the service life of the bearing, mill work.
Web:www.yongli-machine.com
Contact:jessica@yongli-machine.com
评论
发表评论