YONGLI granulator air shaft disassembly tool, its main components are: 1, a long, one short two screw (screw thread processed into positive and negative square spanner and locking screw fit at both ends), 2 , two flanges (intermediate threaded screw and mating) 3, a diameter of 150mm thickness 25mm thick plate (requirements: iron diameter larger than the outer diameter of the hollow shaft small end) 4, special wrench (requirements: wrench and screw 2 Quartet can end with a gap for locking the handle length according to the power requirements).
YONGLI granulator hollow shaft installation tool using features
YONGLI Installation: Is it mainly consists of the installation lever hollow shaft mounting lands (2) and the activities of the thrust plate (2), with the mounting lever (1) at one end with a left-hand thread, install the lever (1) and the other end is provided right-hand thread (filament rod), respectively the hollow shaft mounting rod fixed connection plate (2) by screw tightening assembly so as to achieve the effect.
YONGLI granulating machine using the hollow shaft removal tool features
YONGLI Removal: first with a 25mm thick piece of iron in the air shaft head pad using the active thrust plate (2) Thread (short screw) connection by screw ejector principle so as to achieve the effect of demolition.
Advantages YONGLI removal tools are: force uniform, not off-axis to ensure precise installation. Just a worker can be done, is not easily damaged when dismantling the empty shaft surface (the old method is: use a hammer or heavy impact, the drawbacks are: the hollow shaft surface easily damaged seriously affect the life and appearance).
YONGLI web: www.yongli-machine.com
Contact: jessica@yongli-machine.com
评论
发表评论