跳至主要内容

Introduction to YONGLI sawdust pre-cleaner

Scope of application:
Suitable for feed mill, flour mill, grain silo, biomass processing plant and raw material receiving part of other industries. Mainly used to remove the impurities, such as straw, wheat straw, hemp rope, paper, clod, corn leaves and Corn Cob waste etc.

Equipment introduction:
1. The sawdust pre-cleaner has the advantages of high yield, low consumption, simple structure, small occupied position, easy maintenance, convenient installation and convenient changing sieve tube.
2. Sawdust pre-cleaner is mainly composed of a gear reducer, a sprocket, a drive shaft, a machine shell, a sieve tube, a feed hopper and so on.
3. Working principle: when operation starts, raw materials from the feed hopper get into the sieve tube and sieve rotating cylinder, small pieces of wood through the sieve into next procedure, if large wood chips cannot through sieve, under the rolling and the action of gravity, all discharges from the outlet.

4. Installation notes: equipment and import and export pipeline connection, should pay attention to the seal. The body and the ground flat equipment should be kept with the surrounding distance, to ensure that the operation, maintenance space.

5. Test run note: check the sawdust cleaning sieve is correct, there is no abnormal phenomenon for half an hour after the bearing temperature rise is not greater than 35. 1 hours after the inspection of fasteners, bolts and lubrication of the normal part of the normal.

Web: www.yongli-machine.com
Contact: jessica@yongli-machine.com
Youtube: https://www.youtube.com/channel/UCG_4zOC9ln9xdS8R_qMCxSQ

标签：

评论

发表评论

此博客中的热门博文

Structure and working principle of YONGLI pellet mill

YONGLI ring die pellet mill is mainly composed of feeding, conditioning, granulation, transmission and lubrication system etc. Its working process requires the powder water content is not more than 15%. Powder from the hopper into the feeding auger, by adjusting the infinitely speed motor speed to obtain appropriate material flow, and then enter the conditioner, and through further stirring rod stirred and mixed with steam quenching and tempering. If you need to add molasses or grease, from conditioner joined together with steam conditioning, adding amount of fat is generally not more than 3%, otherwise difficult to shape). After quenching and tempering, the temperature of the powder mixture can reach 64 to 85 degrees C and the humidity is 14 to L 6%. And then through the chute through suction device of iron powder to remove iron impurities mixed in, and finally into the press room. Ring die pelletizer suppress room main working parts by ring mode, two roller, feeding blade, cut knife ...
发表评论
阅读全文

YONGLI animal feed mixing machine

发表评论
阅读全文

Pellet mill ring die inspection and adjustment.

Yongli ring touch lining ring wear the ring die and the transmission wheel is hollow shaft is concentric, that is, we often say ring concentric die is not good, will also enable Yongli machinery granulator produces vibration capacity decreased, seriously affect the service life of the ring die and Yongli machinery granulating machine, can also cause: "ring guide die mouth or a draw ring die cracking and fragmentation; increase mechanical granulating machine spindle bearings and air shaft bearing and gear shaft and the keys of the load to accelerate the wear and tear"; Inspection method: Caliper: wear a 0.5 mm, should be replaced; the ring die is arranged in the driving wheel and ring mold flange and a transmission wheel relative deviation of the observed; ring die and the driving wheel assembly asymmetric ring mold sagging, up, down, left and right push the ring die not loose feeling. Web:  www.yongli-machine.com Contact:  jessica@yongli-machine.com
发表评论
阅读全文