跳至主要内容

In any case, do not weld on the ring die.

In any case, do not weld on the ring die.
Production capacity and product quality
Production capacity and product quality greatly depends on the design of ring die, die thickness parameters and die hole must be suitable for granulating materials. If the particle is produced too soft or too hard, it must be saying that ring die doesn’t match the material.
Mold hole maintenance
Die hole finish affects the performance of the equipment, if you want to maintain a high yield, die hole must be maintained. After stopping the running of the devices, the ring die should be plugged with a mixture of oily, non-toxic, non-corrosive, such as mixed vegetable oil corn grain or sawdust.
Shut down granulator in standard operation
A) Shut down feeder, material quality in row air conditioning.
B) Keep the granulating machine running particles will no longer be produced continuously.
C) When raw material particles are no longer produced continuously, slowly open the door to observe the feeding trough.
D) Will only mixture shovel into the feeding chute until the ordinary particles has been completely out of the ring die and die hole fill the oil mixtures. When removed from the ring die granulating, should be stored in a dry place and covered with dust.

标签：

评论

发表评论

此博客中的热门博文

Structure and working principle of YONGLI pellet mill

YONGLI ring die pellet mill is mainly composed of feeding, conditioning, granulation, transmission and lubrication system etc. Its working process requires the powder water content is not more than 15%. Powder from the hopper into the feeding auger, by adjusting the infinitely speed motor speed to obtain appropriate material flow, and then enter the conditioner, and through further stirring rod stirred and mixed with steam quenching and tempering. If you need to add molasses or grease, from conditioner joined together with steam conditioning, adding amount of fat is generally not more than 3%, otherwise difficult to shape). After quenching and tempering, the temperature of the powder mixture can reach 64 to 85 degrees C and the humidity is 14 to L 6%. And then through the chute through suction device of iron powder to remove iron impurities mixed in, and finally into the press room. Ring die pelletizer suppress room main working parts by ring mode, two roller, feeding blade, cut knife ...
发表评论
阅读全文

Overseas Customer Biomass Pellet Production Line Display

发表评论
阅读全文

YONGLI animal feed mixing machine

发表评论
阅读全文