跳至主要内容

Single paddle feed mixer operation guidance

  1. Single shaft paddle mixing machine and other transmission components make a series, it is controlled by the center. Single shaft paddle mixing machine has no control element.
  2. In order to prevent the material from plugging in the mouth, immediately take remedial measures to avoid damage to the machine.
  3. If you have to use an emergency switch to stop the machine, then clean up the mixer by the easiest way.
  4. Before using, there should be an empty running, the body should be smooth, no vibration, and should be observed for a feeding mechanism is working properly.
  5. Single shaft paddle mixing machine should be the first to start the speed reducer, the rotation of the rotor to be normal before feeding.
  6. And additives should be added in machine ingredients into the half of the batch, the grease should be in all ingredients into the machine after the injection, spray the rear end can discharge.
  7. Single shaft paddle mixing machine when the machine is not used, grease added pipeline must not retain the oil, so as not to block the pipeline after oil coagulation.
  8. The material shall not be mixed with metal impurities, so as not to damage the rotor blades.
  9. Reducer and cylinder, auxiliary components, such as the use, should be in accordance with the provisions of the specification.
标签：

评论

发表评论

此博客中的热门博文

Structure and working principle of YONGLI pellet mill

YONGLI ring die pellet mill is mainly composed of feeding, conditioning, granulation, transmission and lubrication system etc. Its working process requires the powder water content is not more than 15%. Powder from the hopper into the feeding auger, by adjusting the infinitely speed motor speed to obtain appropriate material flow, and then enter the conditioner, and through further stirring rod stirred and mixed with steam quenching and tempering. If you need to add molasses or grease, from conditioner joined together with steam conditioning, adding amount of fat is generally not more than 3%, otherwise difficult to shape). After quenching and tempering, the temperature of the powder mixture can reach 64 to 85 degrees C and the humidity is 14 to L 6%. And then through the chute through suction device of iron powder to remove iron impurities mixed in, and finally into the press room. Ring die pelletizer suppress room main working parts by ring mode, two roller, feeding blade, cut knife ...
发表评论
阅读全文

Overseas Customer Biomass Pellet Production Line Display

发表评论
阅读全文

YONGLI animal feed mixing machine

发表评论
阅读全文